Exceptional engine cleanliness - DYNO GUARD protects against sludge and varnish deposits.
Excellent cold engine start up - To minimize friction and wear at start up.
Ultimate engine protection for severe and normal driving conditions.
Very high shear stability - stay in grade.
Prolong engine life.
For Petrol & Diesel cars.
Dynolube® uses a superior quality range of Group II (instead of conventional Group I) and Group III base oils produced by PETRONAS namely M 500, ETRO 3, ETRO 4 and ETRO 6 and Group IV base oils for its mineral grade, semi synthetic grade and fully synthetic grade of engine oils. Group II base oils are fully produced by Hydrocracking process (a more complex process than what is used for Group I base oils), which makes the oils purer, clearer colour and base stock contain more than 90% percent saturates, less than 0.03% sulfur and with higher viscosity index of 80 to 120, which made the engine oils more stable compare with GROUP I conventional base oils (P.S many local and international brands available in Malaysia are still using GROUP I base oils as their choice), which are solvent-refined, which is a simpler refining process and they are the cheapest base oils on the market.
All Dynolube® engine oils are blended with additives manufactured by 4 world-leading additives company with their brand namely (1) Oloa®, a registered trademark of Chevron Oronite Company LLC, (2) Infineum®, a registered trademark of Infineum International Limited, (3) Lubrizol®, a registered trademark of The Lubrizol Corporation and (4) HiTEC®, a registered trademark of Afton Chemical.
Due to lighting effects, monitor's brightness, contrast settings etc, there could be some slight differences in the color tone of the pictures and the actual item. Please allow 1-2mm differs due to manual measurement, thanks.