Mix one bag (25kg) of QuickMix™ Tile Adhesive (361) with approximately 6.25 litres of clean water.
Mix thoroughly with an electrical mixer for 3-5 minutes until the desired homogeneous mortar paste is achieved.
Allow the mixture to stand for 3-5 minutes and throroughly re-mix before using.
QuickMix™ Tile Adhesive (361) is applied to the prepared surface with a trowel and combed through with a suitable sized notched trowel onto the surface.
Do not spot fix or soak the tiles. Clean back of the tile with a damp cloth if it is dusty.
Only spread enough adhesive so that the tiles can be fixed within the open time. Care should be taken to spread adhesive that can be completed before the surface of the adhesive begins to form a skin. After spreading the adhesive, press the tile firmly into the file faces with a damp sponge before the adhesive sets.