WARRIOR SS-10 SHOWER SEAL (1kg) Ready-to-use waterproofing solution for toilet water leaking floor DIY repair at home

USES Suitable for exterior wall, tiles, stone, granite, marbles and timber surfaces. Reduces water absorption by about 95%. Permanently bonded to substrate. Does not leave any oily residue on treated surface. Reduce or prevent algae growth.FEATURES Solvent – free aqueous silicone ester emulsion. Reduces water absorption capacity of building materials. Waterproof external brick walls and exterior walls without leaving any patch. Can be incorporated into low slump cementitious products, such as imitation stone blocks and paving stones; to significantly permeability to water and the occurrence of unsightly finish. An ideal solution for leaking bathrooms and toilets. Simply spray or brush on tiles and grouts.APPLICATION METHODSTOILET:1) Ensure surface to be treated is clean and intact. It should be free from bitumen, oil, grease and loose particles.2) All the cracks, joints and crevices need to be filled using (W-5 MULTI BOND + Cement).3) Allow the toilet to dry for 1 day before application.4) Apply SS-10 by brush or by spray, apply 2 coats (at 30 minute interval) onto the entire wall and floor tile joints, allow 12 hours for curing.5) Job done.It is advisable to conduct a patch test by applying WARRIOR SS-10 on a remote corner of the floor, to check for any undesirable colour change, prior to full scale application.

W-ONE MARKETING SDN BHD

W-ONE MARKETING SDN BHD

Seller ratings 100%