AE Zimmer Otii F2LC909 General Purpose Silicone-Neutral_Clear (11774)-1Bottle Only 1pack is 3Bottles & 1pack is 5Bottles

One-part, neutral silicone sealant with outstanding adhesion to most building substrates. It further exhibits good weather resistance and workability for glazing.Product Name: F2LC909 General Purpose Silicone-NeutralBrand Name: WACKERType: Silicone sealantSpecifications:Colour: ClearCartridge: 270mlApplication: Window glazing, Stainless Steel, Plumbing, Etc• General Purpose, Sanitary & Natural Stone• Glazing, Windows & Doors• Perimeter Sealing• Sealant for internal connection and expansion joints• Suitable for fenestration and glazingGP-N - GENERAL PURPOSE NEUTRAL COLOURED exhibits excellent primerless adhesion to most non-porous siliceous materials (e.g. glass, tiles, ceramics, enamel,glazed tiles); metals(e.g. aluminum, steel, zinc or copper); impregnated, varnished or painted wood; and some plastics.Users must carry out own tests due to the great variety of substrates.The adhesion can be improved in many cases by pretreatment of the substrate with a primer.Feature:-•Easy cleanup•Economical•Environmental friendly•Long shelf life•Non-sag•Readily gunnable both at low (+5 °C) and high (+40 °C) temperatures•Good tooling properties•Excellent weatherability•Excellent adhesion•Excellent durability•Non-corrosive to metals•Versatile sealant•Permanently flexible•Indoor and outdoor use•Make sure that the surface you are going to silicone is clean, dry and well prepared. This is essential to achieving good adhesion and a smooth bead.•Using a utility knife, remove any remnants of old silicone as new silicone will not adhere to it. After you have removed most of the old silicone with a blade (being careful not to scratch the surface), clean any remaining residue with a fine sandpaper or rub with alcohol.•If the surface is mildewed, use a concentrated mildew killer after removing the old silicone. Allow to fully dry before applying new silicone.•Suitable for alkaline substrates such as concrete, mortar, fibrous cement•Directions: 1. Cut the cartridge tip carefully. 2. Cut the nozzle into an appropriate diameter at an angle of approximately 45° to 60°. 3. Use a caulking gun and extrude the sealant with a single bead. 4. Tool the sealant bead with a clean and dry tool within the working time for a smooth finishing.Packing: 1bottles (1 Pack=5 Bottles, 1 Carton=25 Bottles)