AD Plas - AD 013 Plaster Contact Layer Tile Adhesive Simen Gum Primer Concrete Primer For Wall Plaster - 5kg & 20kg

AD 013 is a polymer dispersion mixed with quartz sand and is characterized by its good alkali resistance. It is used as a bonding layer for mineral plaster on smooth, membrane type substrates.Its application is particularly recommended on very dense and smooth concrete substrate, highly absorbent materials such as mortar, etc and for application for dry plaster. AD 013 reduces the absorbency of mineral substrates and therefore prevents the plaster applied from overheated caused by high rapid water evaporation during curing process.Surface Preparation- The substrate must be clean, free from grease, paint, contamination and loose particles. Soft or weak bonded substrate must be removed.Advantages- Ready to use- Solvent Free - Can be applied by brush, roller or spraying application - Water repellent - Improves bonding adhesion - Minimize sagging during application - SIRIM - Standard: BS EN 1015-12:2016Technical DataConsumption : approximately 250g/m2pH-value : ca. 8Drying time : approximately 2 - 3 hours subject on the weather condition Packing : 20kg & 5kg plastic bucketShelf-life : 12months in sealed original container.Storage : Keep in frost-free, cool and fry condition