Hylaea Fan Mist Kit Outdoor Mist Cooling System Hot Industrial spray fan floor fan water mist cooling water cooling atomization humidification irrigation system

  1. The misting fan kit is ok to be installed in front of any fan, 2. Determine the locations of each nozzle on the front fan guard. 3. Attach the misting system to the front fan guard by the cable ties to make a misting ring like the picture. 4. Connect the adapter to the water tap. 5. Turn on the water tap to wash the system for 1 minute to purge the system and remore any impurities. 6. Screw the misting nozzles to the tee fittings, except the last one on the end plug. 7. Turn on the water tap to wash the system for 2 minutes to insure that the systen is fully purged. 8. Turn the water off and install the last nozzle into the fitting with the end plug. 9. Turn on the tap slightly until jets are working, enjoy the cooling misting fan. 10 Trun off the nozzle, keep them dry and clean when you do not use the misting system for a long time. Industrial spray fan floor fan water mist cooling water cooling atomization humidification irrigation system Hylaea Fan Mist Kit Outdoor Mist Cooling S
jearweangdu

jearweangdu

Seller ratings 94%