Transparent Waterproof Glue Water Proof Sealant Glue Wall Leak Tile Window Stable Film Leakage Repair Wall Coating 透明防水胶

Function: can be directly painted on the wall/ceramic tile/stone/cement foundation, not peeling/powder, effectively prevent the substrate seepage, long service life.Safe operation, simple and convenient construction, cost-effective Product characteristics: waterproof, mould proof and antifouling Film color: transparent Water resistance: excellent Liquid type: water emulsion typeusage method:1. Clean and dry the surface first2. Use a brush to evenly apply it horizontally3. Wait 12 hours for the second time of longitudinal painting4. When the waterproof glue is dry, it can contact with water Precautions:1. Avoid contact with children and contact with eyes. Rinse immediately with plenty of water and seek medical advice.2. Store without direct sunlight and high temperature.3. The waterproof glue must not be exposed to water before it is dry, otherwise it will turn white and fall off.4. A thin layer should be applied each time, and it can be continued after drying. It should not be too thick, otherwise it is difficult to dry.Dosage reference:150g-Available in 0.9 square meter range300g-Available in 1.8 square meter range1kg -Available in 6 square meter range功能：本产品可直接涂在墙面/瓷砖/石材/水泥地基上，不剥落/散粉，有效防止基材渗漏，使用寿命长。操作安全，施工简单方便，性价比高产品特性：防水 防霉 防污漆膜颜色: 透明耐水性: 优液态类型: 水乳型使用方法：1.先清理干净表面污渍，并保持干燥2.使用刷子均匀的横向涂在上面3.等待12小时纵向涂刷第二遍4.等防水胶干燥即可接触水注意事项：1.避免孩童接触，不慎入眼，马上使用大量清水冲洗并就医2.在无阳光直射，无高温下储存3.防水胶未干前一定不能遇水，否则会有发白脱落现象4.每次涂刷时要薄薄的一层，干燥后才能继续涂刷，不能太厚，否则难以干燥用量参考：150g------0.9平方米300g------1.8平方米1kg-----6平方米Notice:~Due to the difference in the light and display of the photo, there may be a certain color difference between the real object and the picture🎨.~Due to manual measurement 📏, please allow slight size difference. But does not affect the use.#Transparent #Waterproof #Glue #Water #Proof #Sealant #Glue #Wall #Leak #Tile #Window #Stable #Film #Leakage #Repair #Wall #Coating #透明防水胶