[1-3 Days Delivery]DAYTECH Wireless PIR Motion Sensor Passive Infrared Detector For TA04 Alarm System Kit PIR01

【Product Instruction】 The detector adopts the advanced digital processing technology. It has the functions of automatic temperature compensation, low voltage alert, intelligent energy conservation etc. It will transmit the wireless signal to trigger the host to alarm by detecting the infrared heat energy of human body. It has the advantage of little environment affection, low false alarm, easy installation, and reliable and safe use etc. *Please Pay Attention:This PIR infrared sensor detector CAN NOT be used independently. It needs to work with the 433MHz alarm host which at our store. 【Function Introduction】 Turn on the switch of the detector. When it detects the infrared heat energy of human body, the LED light will be on and it will transmit the wireless signal. The host will alarm after receiving the wireless signal from it. Only after the detector pairs with the alarm host, the host can receive the alarm signal from it.Make the alarm host in the status of adding detectors. Turn the detector switch “ON” ,The LED light will be one and the detector will transmit the wireless signal. The host will make a beep or voice prompts"adding completed”if it receives the signal. 【Cautions】 lDo not face the glass door/window. lDo not face the big object which is easy to swing. lDo not face the cold and heat air vent or cold and heat source. lThe furniture, miniascape, or any other isolation should be away from the detecting scope. lDo not install 2 or more detectors in the same area or it will cause the interference when alarm. The installation height is 1.8-2meters from the ground. he detecting distance is less than 8meters, the transmitting distance is less than 80meters. Please test the distance after installing. The obstacles will influence the distance. 【Package Part】 1X Wireless PIR Sensor Infrared Detector(battery included) 1X Bracket