Selleys Expanding Foam No More Big Gaps Wall Air Con Pipe Gap Filler Fill Crack and Spray Busa untuk Menyumbat Lubang

Selleys Expanding Foam 750ml : -    Original Selleys product. -    Fills large gaps by expanding up to 20 times. -    Exterior & interior use. -    Blocks draughts, pests, noise & birds. -    Fast curing. -    750 ml -    100% Brand New and in good condition. -    Ship from Malaysia. Suitable for : 1.    Timber 2.    Brick & Concrete 3.    Plasterboard, particleboard & fiber cement sheeting 4.    Masonry 5.    Ceramic Tiles 6.    Glass 7.    Steel 8.    Aluminum 9.    Most Plastics* 10.    Paint 11.    Many other building materials 12.    Not for use on polyethylene, polypropylene, Teflon, silicone or polystyrene.  Features : -    Saves times by curing quickly and expanding 2.5 times to fill those irregular and large holes around the home. -    Excellent insulator as it sets solidly and also blocks pests, noise, and birds. -    Convenient pack, no mixing required -    Easy to finish neatly, as the cured product can be cut, trimmed, sanded, and painted. -    Cures quickly. The surface will be tack free within 15 minutes after application. A 3cm to 5cm deep application will be fully cured in approximately 4 hours. -    Expands up to 20 times after application. However, this will vary depending on the conditions and confinement of the space. -    Temperature resistance – approximately -40°C +90°C. -    Suitable for interior and exterior use. -    It is an aerosol can, so you simply spray into the gaps. -    Contains gloves in the cap for safe application. -    Ozone was safe as it contains a CFC-free ozone-friendly hydrocarbon propellant. -    Not suitable for use as a fire barrier. -    Not suitable for the manufacture of floatation aids or life-saving devices. -    Will does not block rats and mice where access holes are in current use. -    750 ml How to use? 1.    Ensure the surface is clean, dry, and free from dust, grease, flaking/powdery paint, and old or crumbling caulk. 2.    Wear gloves and eye protection. Product is difficult to remove from skin and clothing. 3.    Shake can vigorously for 60 seconds. 4.    Screw the nozzle onto the can valve. Do not overtighten. 5.    Turn the can upside down and gently apply pressure on the trigger to extrude the product. 6.    For extended usage continue to shake the can from time to time. 7.    Clean up any over-sprays and spillage immediately with a dry cloth. 8.    Product will be tack-free in 15 minutes and fully cured in approximately 4 hours. 9.    Do not apply below 5°C. Disclaimer All product images shown are for illustration purposes only. Actual products may vary in term of size, type, brand, version, color, and other relevant characteristics. Please read the instructions before use. Keep out of reach of children.