Stainless Steel SS316 Reducing Tee Fitting 1/4” to 2” NPT/BSPP Female Threads Class #150 T Shaped Reducer Pipe Connector

Welcome to AF Hydro! We offer a wide range of valves & fittings for your everyday needs. Product description: Class 150 fittings are used to extend and alter connections between equipment in a hydraulic system. These fittings have a maximum working pressure of 150 PSI and are commonly used to regulate low-pressure fluid and gas. Therefore, they are used for non-critical and low-cost applications, functioning as a connector to stop leakage between pipes. This reducing tee fitting has three female threaded ends to connect pipes at a 90- or 180-degree direction. The port sizes are different; 2 normal and 1 reducing the flow rate. Applications: Suitable for plumbing, water, oil and gas applications for household and commercial use. It is recommended in light duty industries. Benefits: Easy to install.Low-cost.Resistance against corrosion and rust.Higher durability. Technical specifications:Material: Made of stainless steel 316. This steel grade has a higher resistance against corrosion and rust.Thread type: Female x Female x Female (2 standard, 1 smaller size)Maximum working pressure: 150 PSI InstallationThread the male fitting with Teflon tape or plumber’s tape to provide a tighter seal to prevent leakage.Wrap it clean and make sure it is clean of excess application of Teflon Tape.Tighten the threaded connection using a wrench.