MODI 3 In 1 Electric Mosquito Racket 1200mAh 3-Layers Mesh Insect Swatter With UV Lamp Handheld/ Hanging/ Standing 3000V USB Charging 電蚊拍

MODI electric mosquito killer, electric mosquito killer, and 3000V electric mosquito repellent (with USB cable and charging stand) 3-in-1--MD-EMS-888 type--Product Description--Voltage: 5V--Rated power: 1W--Charging time: 8-10H--The voltage up to 3000V makes it highly efficient.--1200mAh continuous use for a long time--Three layers of steel wire mesh, safe to use.--Built-in LED light--Night use safety--Intelligent electric mosquito killer--Type MD-EMS-999--1200mAh continuous use for a long time--Voltage up to 3000V--Make it effective for use.--Foldable, no mosquito repellent incense base required.--Three layers of steel wire mesh, safe to use.--Built-in LED light for safe use at night. *****Precautions1. This product is for indoor use only and is not suitable for barns, barns, and similar places. Do not use in areas where flammable gases or potentially explosive dust exist.During the operation of this product, the surface of the metal mesh will withstand high pressure. Do not touch the metal mesh surface of the mosquito repellent stick with your hands or any metal objects.If the use efficiency is low, please fully charge before using. Low battery voltage can affect battery performance and service life.4. It is strictly prohibited to wash this product with water. If there are mosquito residues on the surface of the metal mesh, please turn off the switch and clean with a small brush. Please clean the metal mesh promptly after each use.Do not flush surface residues with water to prevent short circuits.5. Do not disassemble, bump, squeeze, or throw the battery into the fire. If swollen, do not continue to use.*****Battery Failure Management WarningBatteries used in the machine may contain materials that are harmful to the environment. Care must be taken when handling waste batteries.1. Before discarding the machine, the battery must be removed from the machine, and after removing the machine components with a suitable screwdriver. Unplug the connector between the battery and the PCB board to remove the battery.Turn off the power before removing the battery.3. Batteries should be disposed of safely in accordance with laws and regulations to avoid environmental pollution and other hazards.This product is only used to repel mosquitoes. Do not use for other purposes.When activated, there is a high voltage on the surface of the metal mesh!Do not touch the surface of the metal mesh with your hands.Or metal objects, do not use as children's toys.