Magic Ice Cube Maker Genie Silicone Rubber Tray Molds Saving Ice Bucket Space Saving Bottle Holders Cooler

★ Reusable The ice cube is not a device that you have to throw away and replace after a few uses. Instead, you can fill it with water and put it back in the freezer to make new ice cream as often as possible. compact While this cube holder is big enough to hold up to 120 ice cubes, it is small enough to fit in a cooler if you want to take it on an outdoor tour. It will certainly be useful if you are in the park or on the beach and make your juice, soda extra-cold. Fights odors If you leave a standard ice cube tray or ice cream container on a counter or table for half an hour or more, the ice cubes may start to smell. Dishwasher It is safe to simply rinse this ice cube holder if it is not too dirty, but if you think it needs a more thorough cleaning, you can safely put both chambers in the dishwasher. How to use 1. Add water slowly along the gap of the cup wall until the wall is full of water, and the water level should be lower than the edge of the outer barrel 2. Press the inner cylinder hard to make sure there is no water at the bottom of the ice bucket ** (Note: if there is water at the bottom, the inner barrel will float up) . Cover and place the ice bucket horizontally in the refrigerator for more than 4 hours(Note: The ice bucket is placed horizontally to prevent water overflow) 4. Take out the ice bucket, pinch and squeeze the ice bucket with water to drop the ice IMPORTANT NOTE: Instructions for use: 1. The bucket in the middle of the ice bucket is difficult to pull out before freezing, and it is easy to pull out after freezing. 2. After adding water to the edge and seeping water along the edge, press down on the bucket to drain the bottom water and cover the lid. The effect will come out after a few hours