Universal Symphony Car LED Ambient Light 64 RGB Color Car Interior Acrylic Light Guide Decoration Atmosphere Light 18/10/6 in 1

Features(There are 210 modes)-Monochrome Mode-Breathe Mode-Gradient Mode-Cycle Mode-Strobe Mode-Music rhythm Mode-Flow Mode-Running water Mode-Mobile phone APP controlOperation MethodFree switch between two modes:（1）Double button mode（2）Bluetooth connection to mobile phone APP controlMode1) Active sound effects: The LED under the car's brightness system is equipped with sound sensors that allow the LED lights synchronized with musical rhythm. The LED light music strip follows the rhythm and adjusts the flicker to adapt to the strength of the sound.2) musical decoration. The Kit designed to be simple, however, also provides elegance inside the car when driving at night or enjoying music. And because it has sound sensor, the car low brightness system is synchronized with the rhythm of the music.3) Sleep mode - Led light will have sleep mode. This mode can automatically change the dark brightness to provide a good atmosphere of sleep.4) Brightness Color temperature adjustment: The LED is equipped with the brightness color temperature adjustment mode. When you feel that the light is dark, you can use this mode to change the brightness.Package include（RGB color）- Item Type : 6 in 1 ( 6 Pcs LED light strip（75cm/4+110cm/1 ） + 1 Main control box + 4 Sub control)- Item Type : 10 in 1 ( 6 Pcs LED light strip（75cm/4+110cm/1 ） + 4 Foot lights + 1 Main control box + 4 Sub control)- Item Type : 14 in 1 ( 6 Pcs LED Light Strip（75cm/4+110cm/1 ） + 4 Foot lights + 4 Handle lights+ 1 Main control box + 4 Sub control)- Item Type : 18 in 1 ( 6 Pcs LED Light Strip（75cm/4+110cm/1 ） + 4 Foot lights + 4 Handle lights+ 4 Storage lights+ 1 Main control box + 4 Sub control)Package include（Symphony color）- Item Type : 6 in 1 ( 6 Pcs LED light strip（75cm/4+90cm/1+20cm/1 ） + 1 Main control box + 4 Sub control)- Item Type : 10 in 1 ( 6 Pcs LED light strip（75cm/4+90cm/1+20cm/1 ） + 4 Foot lights + 1 Main control box + 4 Sub control)- Item Type : 14 in 1 ( 6 Pcs LED Light Strip（75cm/4+90cm/1+20cm/1 ） + 4 Foot lights + 4 Handle lights+ 1 Main control box + 4 Sub control)- Item Type : 18 in 1 ( 6 Pcs LED Light Strip（75cm/4+90cm/1+20cm/1 ） + 4 Foot lights + 4 Handle lights+ 4 Storage lights+ 1 Main control box + 4 Sub control)Please note:If half or part of the symphony LED strip cannot be fully lit in normal mode, it is not a problem with the LED strip. We can set it up in the application to solve this problem.Please refer to the user manual for the method of setting up the application. Thank you for your understanding!Q&A：1.  Q：The LED strip flashes white light.A：Usually, LED strips flash white light due to unstable voltage. The product requires a stable voltage to function properly. So please replace the other 12V power supply connections2.   Q：The LED strip occasionally flashes for a few seconds before returning to normal.     A：Usually, flickering occurs due to interference from other signals. Please check other signal devices or Bluetooth devices inside the car to avoid signal interference. Secondly, do not connect the speaker cable as it may cause interference with the current and cause flickering.3.   Q：After the LED strip was cut, different colors appeared on the cut part.     A：Because during the cutting process, the internal light beads of the LED strip were damaged. Simply cropping the parts with different colors again can solve the problem. However, please note that it is important to avoid damaging the lamp beads again.4.   Q：The LED strip cannot be fully lit, only half or part of it can be lit.     A：can be set in the app to solve the problem. Set a value higher than the LED length based on the length of the LED strip.For detailed APP settings, please refer to the manual. Thank you.5.   Q：Why is the sub module not working?A: Before installation, check the quantity of each part of the product and check the function of the product.And test all products on a 12V power supply (preferably a 12V car battery) to ensure normal operation before installation!The main module must be powered on first, and the sub-module can work normally.The sub control module cannot work independently!Please confirm the difference between the main module and the sub module first. In our product, the simplest way to distinguish is: among the 5 modules, 1 large module is the main module, and 4 small modules are sub modules!6.   Q：How to connect Bluetooth?A：Please scan the QR code of the module first to download the latest application. Before using the application, please make sure to turn on both Bluetooth and location information on your phone, and then open the application, which will automatically connect to the product. If the first connection is not successful, please refresh Bluetooth in the application to connect! Please note that do not connect the product via Bluetooth in the mobile phone system. Please make sure to connect via Bluetooth in the application!