6PCS 450ml Carb Cleaner 化油器清洗剂 Throttle Body / Carburetor & Choke Cleaning Agent with Extended Spray Tube Car Care Accessories

Description:Carburetor Cleaner is a professional strength cleaner for fuel & air intake and delivery systems designed to instantly dissolve varnish, grease, dirt, sludge, gummy residues and fuel sediments that impede engine performance, economy and smoothness. Feature:1. The car cleaner is adopted with unique formula.2. Strong resolvability, osmosis and diffusibility to obviously remove pectin, grime and carbon accumulation oxide layer, etc.3. Used to revitlize the best status of the carburetor and strengthen the deflagrating function.4. Be scatheless for sense organs. Specification:- Product name: Carburetor cleaning agent- Net content: 450ML- Bottle Size : 6.5 x 6.5 x 20cm- Shelf life: 3 years- Scope of application: hardware parts, motorcycles, chains- Main function: The product adopts a strong dissolving and high-speed flushing method to effectively remove colloid, sludge, paint film and other sediments in carburetors, chokes, electronic injectors and other parts without damaging oxygen-sensitive devices Throttle Body:1.Run engine to normal operating temperature.2.Disconnect air intake tube from throttle body.3.Place protective cloths under mouth of throttle body to collect run off.4.Spray directly into the mouth of the throttle body in short bursts while engine is running.5.Spray throttle plates and internals of the housing.6.Wipe away grime that has been dislodged.7.Replace air intake hose, remove protective cloths and test drive vehicle.Carburettor:1.Place protective cloths around carburettor to collect run off.2.Spray directly onto the carburettor parts that need cleaning.3.Spray butterfly valve and into carburettor throat4.Allow the grime to run off or wipe clean with a cloth5.Spray linkages and PVC valves.6.If spraying at an area that normally requires greasing, re-apply lubricant after cleaning. WHAT’S IN THE PACKAGE:1 x 450ml Carburetor Cleaner Spray PLEASE NOTE : Throttle Body & Carb Cleaner should not be sprayed directly onto painted parts or Plastic. If contact occurs wash off immediately. INSTRUCTIONS FOR USE :Take down the air filter on the carburetor; start the engine, keep it rub at a idle speed; shake this product fully and then set the injection pipe on the fuel injector; spray some of the liquids (about 1/3) in the float chamber through balance hole, thus clean the orifice and oil away; spray some of the liquids (about 1/3) in the chock and inner wall of carburetor; spray the rest of the liquids on the outside of carburetor to clean sludge and colloid. It is suggested that the carburetor be maintained or cared per 6000km. Precautions:1.Avoid breathing of vapors, mists or spray.2.Use only with adequate ventilation.3.Do not swallow4.Wash thoroughly after handling.5.Keep out of reach of children.6.Avoid eye and prolonged skin contact.