Electronic Radiator Aluminum Dense Teeth Heatsink Extruded Heat Sink Computer Water Cooling System 100/120/150/200/300x69x36MM

Compatibility: this heat sink can be stuck to an enclosure with SSD. A thermal pad must be in between them for better heat transfer. I chose a smaller heatsink to better carry the SSD. I made the edges blunt with a coin so that it will scratch other things less.\\n Durability: made from an aluminum alloy, this will last long.\\n Cooling Efficiency: at 30 deg C room temperature/weather, the temperature of my other SSD has gone down from 46 deg C to 40 deg C. The dense teeth/fins allow more heat to dissipate. If in front of a small fan, SSD is at 38 deg C. As with my the purchase, On the side stuck on the SSD, I had to fill the spaces between fins of the enclosure with aluminum foil before applying the thermal pad. \\n\\nDelivered in 8 days in good condition. Thanks to the overseas seller, Lazada and the courier.\\n

Compatibility: I used this heat sink stuck using thermal pad and cable tie to an enclosure with SSD. \\n Durability: made from a aluminum alloy, this will last long. \\n Cooling Efficiency: at 30 deg C weather, my SSD temperature has gone down from 45 deg C to 39 deg C if a thermal pad is between this heatsink and the enclosure. The dense teeth/fins allow more heat to dissipate. If in front of a small fan, SSD is at 36 deg C. \\n\\nDelivered in a week in good condition. Thanks to the overseas seller, Lazada and the courier.