DIY hand casting molding kit Clone Fingers Plaster Gypsum Children Hand Model Finger Mold Homemade Sculpture 克隆手指纪念品 亲子

SPECIFICATIONSName: DIY Clone FingerMaterial: GypsumApplicable Age Group: Over 3 Years OldApplicable Gender: GeneralPackage included:clone powder * 1 gypsum powder * 1Notice:1. The size is measured manually, please allow 1-2cm error.2. Due to the difference between the shooting equipment and the shooting light, there is a certain error in the color.*Preparation Steps:*1. Add the powder to 520 ml of cool water (below 28°C), stir rapidly and evenly.- Note:- (1) Ensure the water temperature is below 28°C. Higher temperatures may cause premature solidification.- (2) Stir for a maximum of 2 minutes. Over-stirring may result in failure, making it unusable.2. After 2 minutes of stirring, immediately place your hand into the prepared solution. Let it sit for about 5–10 minutes. The mold will set once it turns purple.Removal Tips:- (1) Do not press the sides or bottom forcefully, as this may affect the mold quality.- (2) Gently move your hand to remove it, avoiding any internal damage to the mold.3. Add 100 ml of cool water to the prepared mold mixture (container optional), stir evenly, and pour it into the mold. Wait about 1 hour for it to solidify.Additional Notes:- (1) Avoid pressing the sides or bottom during the process, as it may affect the mold quality.- (2) Gently shake the container to help with removal, preventing damage to the mold.