For Microsoft Surface Pro4 PRO 4 1724 G3HTA027H tablet battery DYNR01 Original

He's original Hign-concerned Chemical：None Part Number：ABS Battery Cells：2 Cells Package：Yes Model Number：G3HTA027H 5087mAh 38.2wh Battery Voltage：7.5V Type：Li-Ion Origin：Mainland China Certification：CE DYNR01 (the actual capacity of the battery is about 4500mAh - 5000mAh) G3HTA027H G3HTA026H For Surface pro 4 1724 All risks in the process of dismantling and installation shall be borne by the disassembler, and our store will not bear any responsibility. Do not stick double-sided adhesive tape on the battery first, and install the machine after it is tested to be charged and used. be careful:

1. To split the screen, the double-sided adhesive on the frame must be heated before it can be removed. Otherwise, it is easy to break the screen. It must be done slowly and not in a hurry.
2. After the screen is separated, do not open too much to avoid pulling and tearing the screen flat cable and touch flat cable,
3. After the main board screw is removed, try to find a piece of paper or other insulating material to separate the battery interface from the main board interface. After the battery is removed, it is also necessary to avoid contacting the main board battery interface directly with the bottom shell to avoid short circuit. When installing a new battery, it is also best to use a piece of paper to separate the battery from the main board interface. After other flat cables and hardware are installed, pull out the isolated paper and start screwing.
4. If there is double-sided adhesive on the back of the battery, it is also necessary to heat the bottom shell. Do not use metal tools, and do not puncture the battery surface to avoid the fire hazard,
5. Do not paste double-sided adhesive tape on the new battery first, and then install it after confirming that there is no problem with the test charging and use.