2K Premium Epoxy Filler 500G | Epoxy Tile Line Filler 50 Sqft PACK/epoxy filler/premium epoxy filler

🪨 GapStop Epoxy FillerAdvanced 2K Epoxy Filler with Anti-Sag, Low-Shrinkage PropertiesGapStop Epoxy Filler is a two-component epoxy-based filler specially formulated with silica for superior strength and adhesion. Designed for filling tile grout lines, hairline cracks, and minor gaps, it creates a reliable base layer before epoxy or flake coatings.✨ Key Features2K Epoxy System – Part A (resin) + Part B (hardener), mix before use-High Adhesion Strength – bonds securely to ceramic tiles and concrete-Reinforced with Silica – improved compressive strength and durability-Moisture Resistance – cured filler resists water and damp conditions-Sandable & Coatable – provides a smoother substrate for coatings-Shrink-Resistant – maintains stability after curing, minimal volume loss-Easy Application – workable paste consistency for joint and crack filling📦 Packaging & CoveragePacking size: 500g per tinCoverage: approx. 1ft tile floor (up to 50 sq.ft) depending on joint depth and width📋 Application GuideSurface PreparationEnsure substrate is dry, clean, and free of grease/dust.Check moisture – do not apply on damp floors.MixingAdd Part B (hardener) into Part A (resin).Mix thoroughly until uniform paste.ApplicationApply directly into tile lines or cracks using putty knife/trowel.Smooth flush with tile surface.⏱ Drying & CuringTouch-dry / Sandable: ~6 hours @ 25 °C, 50–60% RHRecoatable / Topcoat Application: After 6–12 hours, ensure surface is dry, firm, and sanded flushFull Cure: 12–24 hours (dependent on film thickness, temperature, and humidity)Environmental Factors: Lower temperature or higher humidity may extend cure time; higher temperature may accelerate cure⚠️ Avoid water contact or moisture exposure during curing.FinishingOnce cured, sand flush if required.Vacuum dust before applying epoxy primer or topcoat.📍 Recommended UseFilling tile grout lines prior to epoxy flake coatingLeveling hairline cracks or minor gaps in concretePreparing substrate for epoxy, PU, or other resin-based coatings👉 With GapStop Epoxy Filler, your floor gets a stronger, smoother foundation, ensuring your coating system bonds better and performs longer.