KARCHER 1645-8510 SUBMERSIBLE DIRTY WATER PUMP SP22.000 DIRT LEVEL SENSOR

SUBMERSIBLE DIRTY WATER PUMP SP 22.000 DIRT LEVEL SENSORWith level sensor and integrated prefilter: For challenging drainage tasks the submersible dirty water pump SP 22,000 Dirt Level Sensor manages to pump out dirty water at a rate of up to 22,000 l/h.An individually adjustable level sensor starts the dirty water pump SP 22,000 Dirt Level Sensor immediately upon contact with water. If the water level drops below the level sensor again, the pump stops automatically after 15 seconds. The extremely powerful submersible pump is ideal for draining, for example, large garden ponds, flooded basements or construction pits, as it can reliably pump out dirty water (dirt particles of up to 30 mm) at a rate of up to 22,000 l/h. With even dirtier water, the integrated pull-down stainless steel prefilter serves to protect against blockages. The submersible pump can also be switched to continuous operation by means of the Automatic/Manual switch. It can reliably pump water away down to a residual water level of 35 millimetres – both in continuous operation and in automatic mode, when the level sensor is set accordingly. With the Quick Connect connection thread, 1", 1 1/4" and 1 1/2" inch hoses can be connected without complication. Thanks to the stainless steel housing and robust slide ring sealing, the pump has a particularly long service life. FEATURES AND BENEFITSCeramic face seal.For an extra long lifetime.Level SensorFor continuously variable definition of the switch-on and switch-off points of the pumps.Quick ConnectConnection thread for quick and uncomplicated connection of 1", 1 1/4" and 1 1/2" hoses.Designed for dirty waterReliable pumping of water with dirt particles up to 30 mm in size.Auto/manual switchFor switching between automatic and manual mode.Comfortable carrying handleComfortable to hold and can also be used as a rope holder.Robust and integrated stainless steel prefilterProtects the pump against excessively heavy soiling and thus prevents the pump impeller from becoming blocked.SPECIFICATIONSTechnical dataMax. motor rating (W) 750Max. flow rate (l/h) < 22000Delivery temperature (°C) max. 35Delivery head (m) 8Pressure (bar) max. 0.8Grain size (mm) max. 30Immersion depth (m) max. 7After-running time (s) 15Min. residual water, manual (mm) 35Residual water height (mm) 35Connection threadG1 1/2Pressure-side connection threadG1/2 internal threadPower cable (m) 10Voltage (V) 230 - 240Frequency (Hz) 50ColourYellowWeight without accessories (kg) 6.7Weight incl. packaging (kg) 7.7Dimensions (L × W × H) (mm) 238 x 293 x 354Scope of supplyHose connection piece: 1'', 1 1/4'', 1 1/2'' EquipmentComfortable carrying handle Easy hose connection thanks to Quick ConnectSwitching between manual/automatic operation: Switch on the pump Level sensor: Continuous switching level definition Integrated stainless steel pre-filter In automatic operation (auto), the pump automatically switches with the water level In manual operation, the pump runs continuously to ensure the minimum quantity of residual water Ceramic face seal. Stainless steel housing APPLICATION AREASPumping water from garden pondsUse in event of floodingDraining building pits up to max. 100 m³