Laser Smoke Absorber With LEDMetal Solder Fume Extractor Purifier For SolderingLaser Carving CuttingWood Burning3D Printer

 [Super Strong 3 Stage furification]The Comgrow smoke absorber has a 3 stage filter.The first layer of high-density filter will initially trap large particels such as dust and debris,and the second layer of High Efficiency H18-Grade HEPA Filter remove particles with a size of 0.3 microns (um),the third layer Activated Carbon Filter remove VOCs[Adjustable high suction fan]The solder fume extractor has higher rotational speed, up to 7000RPM, air volume 52CFM.High Cadr 85m³/h,Refresh air of 355 ft2 room:1.3X Per Hour.High purification rate allow you to breathe fresh air again and protect your respiratory tract and lungs. REMEMBER to keep the fume extractor close to you work to ensure the fume be absorbed completely.[23 Inch Tube Telescopic]The smoke absorber tube can change direction 360 degrees at will, it can also be stretched and compressed. Bend the tube to the direction of your project, regardless of which direction you are working on[Perfect combination] The laser protective cover can prevent the diffusion of smoke and odor generated during the laser engraving process. When the smoke extractor is connected with the protective cover, it can absorb all the smoke in the cover, which is more conducive to you to see the engraving process. It is a perfect match that no other brand has.Type: Desktop smoking deviceUse distance: > 15cm (best)Voltage: AC100-240V 50/60HzSize: 19521065mmPlug Type: EU/US/UA/UK