Tuya WIFI Garage Door Opener Gate Receiver 2ch 433mhz 433.92mhz Universal Fixed Rolling Code Multi Brand Controller Switch

Parameters:Input voltage：DC/AC 9V~24V AC85-250VMax.Current:2200W/10ARadio Frequency:433Mhz 433.92MHzCodes: Working with any fixed and rolling code remote controlWorking temperature: -20℃~70℃Programming: press and hold the learn button on the receiver few seconds. Then hold and pressthe remote control button to programming.Delete code: Press and hold the delete code about 20 seconds.Checklist before using the deviceYour smart phone or tablet has connected to a2.4g WiFi with internet.You need to enable Bluetooth of the phone.You have the correct WiFi PWD.You have the correct WiFi PWD.You smart phone or tablet must have access to APPstore,Google play.Your router is MAC-openProducts advantage1,APP control, just click on the Tuya or Smart Life APP to open the door anytime, anywhere.2,Timer,Set a countdown timer to automatically close 1 minute after opening the door3,Hands-free voice control，Compatible with Alexa and Google Home, voice control of door opening and closing.4,Share Control，Share control of your home appliances to your family or friends so that they can also control the devices remotely5,3 Working Modes，Self-locking, inching mode6，Can learn Fixed and Rolling code 433,92Mhz remote controls separately and simultaneously !!!7，2 channel receiver provides you with an option to control and use 2 gate automations or alarm systems simultaneously8,The maximum number of remote controllers stored is 400, which is enough for the entire community to use.9，It's very easy to connect it to your control board. All you need is to connect 4 wires between receiver and control panel. If you will need any technical support - i'm always at your service!10,The product is a general smart receiver and it can be matched with the majority of the wireless receiver in the market, including fixed code （2262, 2260,2264,5326,M1E,M5E etc）, learning code （1527, 2240, 6P20B, 6P20D etc）. roling code （HCS301,HCS300,HCS200,HCS201,HSC100,HCS1O1 etc） and a part of customized remote controller.Checklist before using the deviceYour smart phone or tablet has connected to a2.4g WiFi with internet.You need to enable Bluetooth of the phone.You have the correct WiFi PWD.You have the correct WiFi PWD.You smart phone or tablet must have access to APPstore,Google play.Your router is MAC-openWhen connected, reset the device to pairing mode, i.e. the red light flashes rapidly433mhz Transmitter PROGRAMMING:1.Learning transmitter’s codes:Press “learn 1” or “learn 2” for 2 second, the “learn_led” light, then, press the button which you choose on the transmitter till the “learn_led” flash and go out, the transmitter’s code has been stored.• Repeat the above steps for other transmitters.2.Erasing transmitter’s codes:Press “learn 1” or “learn2” and hold on to make the “learn_led light till go out, all codes of transmitters which had been stored are erased.