Hydrothermal Autoclave Reactor Vessel Kettle with PTFE Chamber Hydrothermal Synthesis 50ml

Hydrothermal Autoclave Reactor vessel kettle with PTFE Chamber Hydrothermal Synthesis 50ml1.Technique Data:(1) Operating temperature: 220° (2) Working pressure: 3MPa (gauge) (3) Heating, cooling rate: 5 c / min (4) specification 25ml,50ml,100ml. (150ml,200 ml or others customized according to users needs.) Packing list：Sold by set2. Feature:The hydrothermal synthesis reactor using high-quality stainless steel processing. Kettle kettle lid body and sealed with durable, reliable cable seal structure, the sealing effect long-term stability without leakage. The hydrothermal synthesis reactor with external heating, to reduce the volume and more favorable reaction in the same reactor operating temperature (such as multiple reactor placed in an oven heated).3. Methods of operation:The reaction means and the reactor body, and to ensure feeding coefficient is less than 0.8. When the Department of corrosive reaction when you want to put PTFE bush, can only be assured kettle body from corrosion. Hydrothermal synthesis reactor will be placed on the heater, in accordance with the provisions of the heating rate of heating to the desired reaction temperature (less than the required safety temperature). Completion of the reaction will be when its cool, but also in strict accordance with the provisions of the cooling rate operation, to facilitate the safety and reactor life. When confirmation of intra-abdominal temperature below the boiling point solvents reaction system can only open the tank lid after a follow-up operation. Hydrothermal synthesis reactor each time after use to clean, to avoid corrosion. Kettle body, kettle lid seal line to pay particular attention to clean and prevent damage to the bumps.4.Introduction of "para-polyphenylene (PPL)" lining performance of hydrothermal reactor:(1) The para-polyphenylene also becomes a polyphenylene, which is a high-linker linked by a benzene ring. The para-polyphenylene has high temperature resistance and can be used for rocket engine parts and space navigation; The para-polyphenylene has good thermal stability and can be used to make high temperature bearing materials; The para-polyphenylene has good corrosion resistance and can be used as a bearing and chemical equipment with corrosive environment and working conditions; The self-lubricating performance of para-polyphenylene is better than that of molybdenum disulfide and graphite, and can be used to make oil-free lubricating seal rings, packings, piston rings, etc. Due to the great rigidity and regularity of the molecular chain of the para-polyphenylene, it is infusible and insoluble, and it is difficult to process itself. It needs to be mixed with other materials. Polyphenylene and polytetrafluoroethylene will be blended to make piston rings, rubber-plastic rails, sealing bushings, fillers, etc., which are used in chemical, light industry, textile, printing and dyeing, machinery and other industries, and achieved good results. (2) High temperature resistance: The "polyphenylene" powder is burned at 520 °C in the high temperature furnace, and it has no melting point. It is heated at 450 °C for a long time. It is a kind of engineering plastic which is used for a long time below 400 °C. . (3) Radiation resistance: Under the irradiation of cobalt source (Co60), it can accept 9*106 lats and the performance is unchanged. (4) Chemical corrosion resistance and solvent resistance type: So far, no solvent has been found in the world for dissolving polyphenylene, and strong acid such as hydrofluoric acid hydrofluoric acid and strong alkali cannot corrode it. (5) Electrical properties: volume resistivity 1015 ohm-cm, under different polymerization conditions, can become an organic semiconductor, volume resistivity 1017 ohm-cm. (6) Self-lubricating properties: It has good self-lubricating properties, and is much better than molybdenum disulfide and graphite, or other filled polystyrene-tetrafluoroethylene products. 200ml hydrothermal reactor introduction material: The kettle body is made of high-quality stainless steel, which is sealed by a circular groove. The manual spiral is strong. It has good sealing performance, high safety factor, low consumption of acid solvent and easy to use! 200ml hydrothermal reactor introduces product features: 1. High temperature resistance: use temperature -200 ~ +300 °C; 2. Low temperature resistance: -196 ° C can be maintained at 5%; 3. Good corrosion resistance, no harmful substances spillage, reduce pollution and safe use. 4. After heating and boosting, the sample which is difficult to dissolve under normal conditions and the sample containing volatile elements can be quickly and non-destructively dissolved. 5. Beautiful appearance, reasonable structure, simple operation, shorten analysis time and reliable data. 6. There are PPL bushings inside to generate care, which can be resistant to acid and alkali. 7. It can replace the platinum ruthenium to solve the problem of sample processing in the analysis of trace elements in high purity alumina. The high-pressure digestion tank used in the oven, also known as a sample dissolver, a pressure-dissolving , a hydrothermal synthesis reactor, and a digester tank, is an environment in which a strong acid or a strong alkali in a tank is used and a high temperature and high pressure is sealed to achieve rapid digestion of poorly soluble substances. purpose. It is a good assistant for digesting samples when measuring trace elements and trace elements. Sample pretreatment to eliminate heavy metals, pesticide residues, food, sludge, rare earths, aquatic products, organic matter, etc.Shipment:1.We will send the items within 4-5 days once your payment is completed.2.We do not guarantee delivery time on all international shipments due to differences in customs clearing times in individual countries, which may affect how quickly your product is inspected.Notice :1.Please note that buyers are responsible for all additional customs fees, brokerage, fees, duties, and taxes for importation into your country. These additional fees may be collected at time of delivery. We will not refund shipping charges for refused shipments.2.The shipping cost does not include any import taxes, and buyers are responsible for customs duties.3.About customs clearance: For countries that are difficult to pass through customs, such as: Brazil, Chile,Turkey, Argentina, etc. Make sure you have the ability to pass customs. We do not give a refund if the buyer cannot go through customs and Customs deducts the package.4.If your place is remote ,then need to pay 38usd .Returns:1.We do our best to serve our customers the best that we can.2.We will refund you if you return the items within 15 days of your receipt of the items for any reason. However, the buyer should make sure that the items returned are in their original conditions.  If the items are damaged or lost when they are returned, the buyer will be responsible for such damage or loss, and we will not give the buyer a full refund.  The buyer should try to file a claim with the logistic company to recover the cost of damage or loss.3.The buyer will be responsible for the shipping fees to return the items.Warranty & Maintenance:1.We offer the 1-month free replacement.  Buyers may request for a replacement within 15 days from your receipt of the product. The buyer should return the product in the original conditions to us and should bear the shipping costs for return.2.We also provide one year free maintenance.  The buyer should return the product in the original conditions to us and should bear the shipping costs for return.  If any part is required to be replaced, the buyer should also pay for the costs of the parts to be replaced.3.Before returning the items, please confirm the return address and the logistics method with us. After you give the items to the logistic company, please send us the tracking number.  As soon as we receive the items, we will repair or exchange them ASAP.Feedback:1.Your satisfaction and positive feedback is very important to us.  Please leave positive feedback and 5 stars if you are satisfied with our items and services.2.If you have any problems with our items or services, please feel free to contact us first before you leave negative feedback.  We will do our best to solve any problems and provide you with the best customer services.