(1031-1054) 18L Nippon Paint Exterior Weatherbond Timeless Off-Whites

**NOTEFor buyer who want to purchase above 2 items of paint (above 5L), please make order separately because Courier Company do not accept 2 items of paint in 1 consignment not. And for you parcels safety delivery, please make order separately. Thank you.**NOTABagi pembeli yand ingin membeli lebih dari 2 produk cat (5L ke atas), sila buat pesanan secara berasingan kerana Perkidmatan Pos tidak menerima 2 produk cat dalam 1 penghantaran. Dan bagi penghantaran keselamatan barang anda, sila buat pesanan secara berasingan. Terima kasih.NOTE: The colours shown here are as close to actual paint colours as modern printing techniques allows. Due to different computer monitors/calibrations colours may vary slightly from the picture.Nippon WeatherbondWeatherbond is a pure acrylic-based paint with non-added lead and mercury which is specially formulated for exterior walls. This premium exterior emulsion is formulated to provide at least 7 years’ protection against fungus and algae growth, chalking and flaking.Features and benefits:Non-added lead and mercuryDurable against harsh weatherTougher resistance against dirt, fungus, algae, flaking and efflorescencePeel, flake, fade & chalk resistance7 years’ protectionApproved by SIRIM to Malaysian Standard MS 134: 2007Spreading rate per coatTheoretical Coverage10m²/l - 12m²/l Actual coverage is dependent on substrate condition, application method,application condition and finishing appearance.Packing size:1Litre, 5Litres,15 Litres,18 LitresRecommended use:For interior and exterior application, suitable for new buildings or repainting.Substrate:On Masonry, brick, plastering substrate and fibre board Application data- RemarksHandle with care. Stir well before use.Application equipment / methodsBrush / Roller : Dilute the paint with not more than 5% of water. Preferable not dilute for best performance. Directions for use- Surface preparationRemove all loose, defective paint or powdery residues, loose chalk, dust, fungus, algae and foreign matter. Treat any areas affected by fungus growth with Fungicidal Wash Solution. Repair cracks, uneven surfaces with suitable exterior grade fillers. Smoothen the filler areas with sand paper. Surfaces to be painted must be cleaned thoroughly and dry, it must be free from dirt, grease and other foreign matters. Allow all surfaces to dry completely prior to painting. Avoid painting when the moisture content and alkalinity of the walls are still high. (Recommended painting specification requires the moisture content of the walls to be below 16% measured by protimeter and alkalinity of the walls to be below pH9.) Spot prime with Nippon Exterior Wall Sealer.