DC 12V 24V 36V 420-450MHz 4 Channel 10A Relay FSK FHSS Wireless Remote Control Switch Receiver Transmitter For Motor Lights

1."Intelligent FHSS " we are the first to integrate FHSS （Frequency-Hopping Spread Spectrum） technology into the industrial control suite which requires strict safety standards, the range is 420~450MHZ, which can achieve the remote control of hundreds of equipments in the same area without interfering with each other.2."Stable signal" adopts FSK signal transmission mode, which has the characteristics of long spreading distance, high output stability and strong anti-electromagnetic clutter interference, and can effectively and stably control within the measured range of 300m.3."Unique code" has two more bits than 1527 chip, has more code combinations, and burns ID control for each batch of products, ensures the uniqueness of all product ID codes, and eliminates the problem of re-coding.4."Good quality material" adopts red copper relay, high silver contact, high elasticity shrapnel, good conductivity, non-stick contact, better performance than brass relay long life, standard suction and closure times up to more than 100,000 times.5."IP68" The remote control is injection molded with ABS high toughness plastic particles, and all the joints of the body are sealed, which has the industrial standard of waterproof, dustproof, anti-fingerprint and shockproof.6."Faster Response" Compared with the conventional remote control, the successful response time is 200ms for each press, in order to realize more accurate control, we have improved the response time of the remote control to 50ms now, which is 4 times faster.7."Power on pairing" Pairing/adding is simple, after power off, power on again and press the specific new remote control button within the specified time to pair, no need to climb to the top of the crane and press the learning button like the ordinary receiver pairing.8."Mutual copy" frequency hopping remote control with mutual copy function, additional remote control no longer need to send back to the manufacturer to deploy, can be achieved through a specific key operation can be copied to add matching, reduce unnecessary time costs.About Receiver: Model No.: AK-C2403181. Working voltage: DC12V-36V2. Quiescent condition: Less than 13mA3. Working temperature: -40 Degree +80 Degree 4. Receiver sensitivity: more than -105dBm5. Working frequency: 420-450MHz6. Output voltage: DC and AC is optional7. Max load current: 10A8. Size: 968029mmAbout Working way:Working way changed by Learning buttonMomentary: Press the Learning Button 1 times. Relay: Press and hold -> On; Release -> Off.Toggle: Press the Learning Button 2 times.Relay: Press -> On; Press same button again -> Off·Latched: Press the Learning Button 3 times. Relay: Press -> On; Press other button -> Off. 2channel Momentary +2channel Latched: Press the Learning Button 4 times. 2channel Momentary +2channel Toggle: Press the Learning Button 5 times.2channel Toggle +2channel Latched: Press the Learning Button 6 times. About Learning and clearing Method:Learning: Press learning button, the indicator flashes and OFF, loosen finger, press "STOP" button of the remote transmitter, indicator flashes three times, meaning learning succeeds.(how many times press the learning button according to the working way you need)Clearning: Hold press learning button about 8 seconds,indicator light flashes several times and off, then press remote ,Relay did not Respond ,it means clearning code successful.About Transmitter:1.Model:AK-K2312022.Modulation:FSK3.Coding format:Customized encryption code4.Operating frequency:420~450MHz(frequency hopping)5Operating Current:Transmit 20mA/Standby ≤15uA6Battery type: 2* AA 1.5V batteries (Not included)7Shell material: ABS8.Size and weight:1554725mm/87gWhen change working model, you need to press the learning button (press several times according to the mode you want), and then press and hold the "STOP" button of the remote control until the receiver flashes slowly and then goes out, switching the work mode successfully.For operational safety, only one remote control is currently allowed to be stored per receiver, meaning that each receiver can only work with one remote control.