Blue Button 868 HS4 Remote Garage Gate Door Control 868Mhz HSM2 HSM4 HSE4 HSE2 HS1 HS2 868.35MHz Handheld Transmitter

Compatible withHS1 868MHzHS2 868MHzHS4 868MHzHSE2 868MHzHSE4 868MHzHSZ1 868MHzHSZ2 868MHzHSP4 868MHzHSM2 868MHzHSM4 868MHzHSP4-C 868MHzHSD2-A 868MHzHSD2-C 868MHzSpecification:Type of programming: self Copy+PROGRAMMINGNumber of channels: 4Size: 60388mmProduct material: ABSProduct weight: 40 gBattery: 12V 23AInstallation: wirelessWireless transmission distance: 50-150 (m). (open space) Frequency:868MHz, 868.3MHz, 868.35MHz.Not compatible with Bs BISecur version.Package includes:1Remote Control（Battery Include）1Keychain1*English Manualyou can use it in two waysA:How to programFace to face copy your original remote controlStep:1:Clear the history code from duplicator1.Press button A and B continuously until LED flash 3 times2.Release button B (Keep pressing button A),and press button B Slowly for 3 times,LED flash3.Release button “A”,finish code clearance.Step 2,Copy code from original transmitter1.Put duplicator aside of original transmitter,as close as possible.2.Press and hold button A of original transmitter,then press and hold button A of duplicator until you see the duplicator’s LED flash3.Release both buttons,finish code copy,copy other button in same way.Button A= Lock button Button B=unlock buttonB:Programming1. Open the casing of your receiver. It is located next to your motor.2. On the receiver circuit board, press the programming button and let it go (ENR, MEMO, PROG, REC according to the model) The LED light on the receiver illuminates or blinks.3. Press a button on your new remote control for 1 second.4. Let the button go. The LED light on the receiver turns off immediately or in the following 10 seconds according to the model.Your new remote control is programmed.