MPPT Solar Controller 12V 10A Solar PV Controller Suitable for Lead-Acid and Lithium Batteries For Lifepo Battery Type C

Features1. Compatible with 12V lead-acid batteries, 12V gel batteries, and 12.8V lithium iron phosphate batteries2. Three-stage charging management effectively extends battery lifespan3. Features overcharge, overcurrent, reverse solar charging, and reverse polarity protection4. Automatically shuts off display at night to enter standby mode, reducing power loss5. Equipped with USB and Type-C ports for powering devices via solar or batteryParameterController Type: MPPTBattery Voltage: 12VMaximum Charging Current: 10AMaximum Open-Circuit Voltage (VOC): 30VBoost Voltage: 14.4V for Lead-Acid/Gel Batteries, 14.6V for LiFePO4 BatteriesFloat Voltage: 13.6~13.8V for Lead-Acid/Gel BatteriesSelf-Discharge Current: USB Output: QC18W (MAX) 5V3A/9V2A/12V1.5ATYPE C Output: PD20W (MAX) 5V3A/9V2A/12V3AImportant Notes1. This controller is exclusively for 12V batteries. Do not use with 24V batteries or 36V solar panels.2. This controller is compatible with 12V gel batteries and 12.8V iron-phosphate lithium batteries. Set the battery type before first use. The controller has a memory function and will continue to operate based on the set battery type until changed again.3. Install the controller as close to the battery as possible to avoid voltage drop caused by excessively long wires, which may affect voltage detection.4. This controller must only be used with photovoltaic panels as the charging source. Do not use DC batteries or other charging power sources.5. The controller generates heat during operation. Ensure the installation environment is well-ventilated.6. This controller is not waterproof. Do not submerge it in water or expose it to rain.Package includeSolar Controller1+Chinese/English Instruction Manual1