150W Powerful Swimming Pool Vacuum Water Suction Pump Portable Pool Cleaner Machine For Underwater Debris Floor Bottom Cleaning

Tired of seeing seaweed, bugs, and stubborn debris at the bottom of your pool or pond? Our high-performance vacuum system is specifically engineered for medium to large swimming pools and outdoor ponds. Featuring a turbocharged water pump and a specialized triangular suction head, this machine blasts through sand, pebbles, and organic waste, keeping your water pristine without the back-breaking labor.✨ Key Features️ 【Tornado-Strong Suction】 Turbocharged Pump: The 150W motor delivers a massive 9,000 litre/hour flow rate, strong enough to suck up pebbles and heavy debris. Corner-to-Corner Cleaning: The weighted triangular head is designed specifically to reach into sharp corners and edges where dirt usually hides. 【Durable & Surface-Safe Build】️ Corrosion-Resistant ABS: Constructed from high-grade ABS plastic to withstand pool chemicals and outdoor weather conditions.️ No-Scratch Bristles: Soft plastic bristles loosen stuck-on dirt while protecting your pool liner or pond surface from scratches.⚖️ 【Stable Underwater Performance】⚓ Weighted Design: The vacuum head is precisely weighted to sink and stay submerged, preventing it from floating up and losing suction during use.⚓ Universal Connection: Easily attaches to standard telescopic poles and hoses for maximum reach and control. 【Eco-Friendly Water Recycling】♻️ Filter Bag System: Includes a mesh filter bag at the outlet to trap debris while allowing clean water to flow back into the pond or pool.⚙️ Technical Specifications Max Power: 150W (Optimized for 30m² areas) Max Flow Rate: 9,000 Litres / Hour️ Material: High-Impact ABS Plastic Suction Head: Weighted Triangle Min Water Depth: 35cm (For pump submergence) Power Options Guide 55W: Best for small ponds up to 10m² 85W: Ideal for medium pools up to 20m² 150W: The Giant Slayer — Best for pools/ponds up to 30m² Easy Installation Steps1. Connect Pump: Attach the long connector to the pump port and the short connector to the side.2. Attach Head: Secure the triangular suction head into the water inlet.3. Drain Pipe: Install the corrugated drain pipe at the outlet and tighten the round hoop.4. Pole Setup: Connect the suction head to your telescopic pole and lock the white snap.5. Submerge: Place the entire machine into the water (ensuring it is fully submerged).6. Recycle: Attach the filter bag to the drain pipe outlet to catch waste.⚠️ Maintenance & Safety Tips Dry Run Warning: Never turn the pump on outside of the water. Running it dry will cause overheating and permanent motor damage. Gravity Alert: Do not attempt to suck dirt off vertical walls; the weight can crack the interface. Use only on the floor. Clean Regularly: After every session, disassemble and rinse out sediment from the pump body to maintain high suction.️ Depth Check: Ensure the water is at least 35cm deep to completely cover the pump motor.