USB Temperature Recorder -30℃~70℃ 365 Days Single-use Temperature Data Logger Temp Monitor for Cold-chain Warehouse

365 Days Single-use Temperature Data Logger USB Temperature Recorder -30℃~70℃ Temp Monitor for Cold-chain WarehouseThe Single-use Temperature Data Logger is a type of our cold chain data logger. It is mainly used for temperature recording during storage and transportation of foodstuff, medicine, chemicals and other products. High measurement accuracy, large memory capacity, long battery life and shadow mode. After recording is complete, insert the device into the computer's USB port to automatically generate PDF and CSV reports.Item ParametersTemperature Scale :℃ or ℉ [Default: ℃]Measuring Range :Temp -30℃ ~ +70℃Accuracy: ±0.3℃ (-20℃~+40℃), ±0.5℃ (other)Resolution: 0.1℃Data Capacity: Up to 68000 readingsUsage Type :Single-useStart Mode Button :Start or Timed Start [Default: Button Start]Recording Interval: Programmable (10 seconds~99 hours) [Default:10 minutes/365 days]Start Delay: Programmable (0~72 hours) [Default: 30 minutes]Alarm Range:Programmable high or low alarm limit for each channel[Default:8℃]Alarm Type: Single type, Cumulative type [Default: Single type]Alarm Delay: Programmable (0~99 hours) [Default: 0 minutes]Form of Report:PDF report and CSV file are optional[Default: PDF and CSV]Interface:USB2.0 InterfaceWaterproof: IP67Battery Shelf Life :3 years (Normal temperature 25℃)Time Zone :Programmable [Default:UTC +0:00]Operating Instructions1）Start recordingPress and hold the button more than 3 seconds. Then the 'OK' light (Green) will light up for 3 seconds, indicating a successful start, You can then place the data logger in the desired monitoring location.2）Stop recordingPress and hold the button for more than 3 seconds. Then the ‘ALARM’ light (Red) will light up for 3 seconds, indicating a successful stop. 3）Get reportAfter recording, connect the device to the PC's USB port. The device will automatically generate PDF and CSV reports, which can be opened to view the data.Note: If the device is not started, it will enter the shadow mode and record data onceevery hour by default.