【⭐Local Shop⭐6-100W】Submersible Aquarium Water Pump Cycle Filter Fish Tank Powerhead Fountain Pond

【⭐Local Shop⭐Oxygenation pump】6W/12W/25W/40W/60W/100W Submersible Aquarium Water Pump Fish Tank Powerhead Fountain Hydroponic Pond ✨ Go ✨ 🎊Product Included: Submersible Water Pump *1 Sucker * 4 Outlets(Different models have different quantities,Please refer to the details page for more information) 🎊Product Data: Material: ABS + PC Plastic Color: Black+Blue Plug: US plug Power: 6/12/25/40/60/100W(optional) Voltage rating: 220-240V/50HZ Feature: Powerful, Low noise, Energy-saving, Easy install & disassembly Function: water pumping, water absorption, filter impurities, oxygenation,Ecological water cycle Occasion: Fish Tank, Aquarium, Pond 6W-DH-1000:discharge 350L/H , lift 0.6m , Equipped with two water outlets：8/13mm； 12W-DH-1500：discharge 650L/H , lift 1.2m , Equipped with two water outlets：8/13mm； 25W-DH-2000：discharge 1200L/H , lift 1.8m , Equipped with one water outlets：13mm； 40W-DH-2500：discharge 2500L/H , lift 2.5m , Equipped with three water outlets：13/16/19mm； 60W-DH-3500：discharge 3500L/H , lift 3.5m , Equipped with three water outlets：16/19/25mm； 100W-DH-4500：discharge 4500L/H , lift 4.5m , Equipped with three water outlets：16/19/25mm； Reminder: It is recommended that the water flow rate of the water pump per hour be 5-10 times that of the fish tank water 🎊Product Features: -Please do not use the pump where there are sand and stones, which will hinder the use of the product. If you find noise from the product, please disassemble it for cleaning and make sure that there are no other foreign objects. -Important fact: Lift height(H.Max) does not mean the fountain height from the outlet! -If you have problem with the output height of the pump, please confirm it with the correct measure method:

1. Connect a transparent hose with the outlet of the pump. 2.Pull up and straighten the hose, start the pump. 3.Measure the height from the centre point of the pump to the water level in the hose. If you consider the output from the pump is not strong enough, please make sure that connect a hose to the outlet and make the hose higher than the water level. ⛔Note: 1.Size Transition: 1cm=10mm=0.39inch 2.The Items Are 100% New, We Offer The Best Product At The Best Price. 3.Please Allow 1-3 Cm Error Due To Manual Measurement. Please Make Sure You Do Not Mind Before You Bid. 4.Due To The Difference Between Different Monitors, The Picture May Not Reflect The Actual Color Of The Item. Thanks For Your Support. 5.Please Kindly Leave Us a Positive Comment (5 Stars), If You Are Satisfied With Our Items. 6.Please Contact Us Immediay If The Item You Received Is Defective. Contact Us Before Leaving Any Negative Comment Or Open a Dispute On . We Are Always Do Our Best To Solve The Problem. Thank You~~~ ##Water Pump #Submersible Water Pump #Aquarium Water Pump