Loves Home Cement Remover 500g Pipeline Clogging Surface Residue Dissolving Pelarut Simen 心居客水泥溶解剂

PRODUCT DESCRIPTION:Loves Home Cement Remover 500g is specially made for cement residue and cement-related blockage problems after renovation or construction work. It helps dissolve cement build-up, surface cement residue, toilet urinary alkali deposits, and general renovation dirt.Suitable for pipeline cement clogging, floor drain cement blockage, toilet residue, tile surface cement residue, and renovation cleaningPRODUCT FEATURES:✅ Helps dissolve cement residueSuitable for removing cement build-up left after renovation or construction.✅ Helps clear cement-related pipe blockageCan be used for pipeline cement clogging and floor drain blockage caused by cement residue.✅ Suitable for surface cleaningHelps remove cement residue on hard surfaces after renovation.✅ Small amount, repeated useFor better results, use small amounts repeatedly instead of pouring too much at once.✅ Suitable for renovation clean-upUseful for new house renovation, toilet cleaning, floor drain cleaning, and general construction residue cleaning.PRODUCT DETAILSProduct Name: Loves Home Cement RemoverSpecification: 500gComposition: Solvent, Chelating Agent, Complexing AgentShelf Life: 3 YearsSCOPE OF APPLICATION✅ Pipeline cement clogging✅ Surface cement residue✅ Toilet urinary alkali deposits✅ Floor drain cement blockage✅ General construction / renovation cleaningMETHOD OF USE1. Hot Water DissolutionDissolve 50g of product in 100ml of hot water.Dilution ratio is about 1:5.Use the solution while it is still hot for better results.2. Completely Blocked PipelineRemove stagnant water from the pipe first.Pour 50–100ml of the prepared solution into the pipe.Make sure the blockage area is fully covered.Every 2 days, use a toilet pump to loosen the blockage, then drain and reapply the solution until the pipe is cleared.3. Partially Blocked PipelinePour 50–100ml of solution every 30–60 minutes.Use a small amount repeatedly for better control.A toilet pump can be used during the process to help loosen the blockage.4. Surface Cement ResidueWet the surface area with water first.Apply the solution to the cement residue using a brush.Allow a short reaction time.Scrub with a stiff brush and rinse clean.IMPORTANT SAFETY REMINDER: ⚠️ Wear gloves during use.⚠️ Avoid direct contact with skin and eyes.⚠️ Keep away from children.⚠️ Do not swallow.⚠️ Do not mix with other chemicals.⚠️ Use in a well-ventilated area.⚠️ Test on a small hidden area first before applying to large surfaces.⚠️ Use small amounts repeatedly for serious blockage.⚠️ Rinse thoroughly with water after cleaning.