For STYLO2K STYLO4K Remote 433.92MHz Rolling Code White/Black Keyfob for Garage Gate Door Opener

Description1. Model：RA0422. Type of programming：Programming with the receiver3. Frequency：433.92MHz4. Code：Rolling Code5 . Buttons：46. Battery：Include Battery7. Range：50m-100mCompatible ModelsSTYLOSTYLO2KSTYLO4KNOTE：The transmitters to be programmed must be of the "Stylo4K", "Stylo2K", DigyPad, Myo C4, NowoTX, NovoDigy series.Access to receiver required. Please make sure you got access to your receiver/opener before purchase.Disclaimer: Your remote control must be the same as the picture and your model must be in the list, we will not be responsible for wrong purchase.How to program ?Materials required for programming: your receiver!Open your receiver from the garage door.Press the programming button. Inscription is usually: ENR, MEMO or PROG.On some receivers, it is necessary to hold down the programming button.On the receiver the LED indicates the start of the programming mode.Press for one second on a button on the new remote control and let it go again.The LED of the receiver will light differently or goes out to indicate a successful programming.Wait a few seconds to exit the programming mode.Congratulations! Your new remote control is programmed!