Makita HR2670X5 26 mm (1") Combination Hammer

Makita HR2670X5 26 mm (1") Combination HammerFeatures:26 mm (1") 3.0 J Combination Hammer, SDS-PLUS.Increased power and durability have been achieved by redesigning the internal structure while enhancing cost competitiveness by modifying the motor specifications from model HR2470.Equipped with three operation modes (Rotation only / Hammering only / Rotation + hammering).Powerful 800 W motor delivers 3.0 J of impact energy to handle the most demanding applications.Compatible with SDS-PLUS shank.Specification:Continuous Rating Input: 800 WImpact Energy: 3.0 JCapacity:Concrete: 26 mm (1")Core Bit : 68 mm (2-11/16")Diamond Core Bit : 80 mm (3-1/8")Steel: 13 mm (1/2")Wood: 32 mm (1-1/4")Impacts Per Minute (IPM): 0 - 4,500No Load Speed (RPM): 0 - 1,500Dimensions (L x W x H): 362 x 77 x 207 mm (14-1/4 x 3 x 8-1/8")Net Weight: 2.9 - 3.4 kg (6.4 - 7.5 lbs)Power Supply Cord: 4.0 m (13.1 ft)Standard EquipmentSide Handle, Depth Gauge, Drill Chuck (194041-7), SDS-Plus Bit Set (D-17784), Bull Point (D-08713)* Items of standard equipment and specifications may vary by country or area. Net weight and dimensions may differ depending on the type of battery(ies) used. All pictures shown are for illustration purposes only. Continuous Usage Time/ Work Amount: Actual performance may vary based on application.PURCHASE:16807 Makita Combination Hammer HR2670X5 (800W) x 1Included Accessories:-Makita Drill Chuck Set x 1-Makita Drill Bit & Chisel Set x 1-Makita Original Carry Case x 1FREE GIFTS:07621 Safety Spectacles - Clear x 102051 SDS-PLUS Type Masonry Drill -  6.0 x 110mm x 102052 SDS-PLUS Type Masonry Drill -  6.0 x 160mm x 102053 SDS-PLUS Type Masonry Drill -  8.0 x 110mm x 102054 SDS-PLUS Type Masonry Drill -  8.0 x 160mm x 108303 SDS-PLUS Type Masonry Drill -  10.0 x 260mm x 1(1-Year Warranty)Toolstop Hardware are Makita Official DealerT&C: *Free gifts are not covered by warranty. If stock runs out, we will replace them with other brands or sizes without further notice.