Leapmotor c10 Carbon Fiber Welcome Pedal Door Sill Scuff Plate Guards Protector Coverframe decorative stickers interior modification abs accessorie Interior Accessories Exterior Accessories Protection Cover Premium Quality Garnish Cover Sport Design Luxur

Installation Instructions 1.Analog Installation Adjust The Position Of The Product To Be Installed In The Car To The Exact Position. 2.Surface Treatment (1) Clean Use Towel To Dip Alcohol On The Area To Be Installed Or Wash The Body With Clean Water. (2) Precautions Before Installation, The Body Must Be Kept Dry Without Dust, Oil, Wax, And The Temperature Below 10 Degrees Must Be Warmed With 3M Glue On The Body And Product. (3) Use Of Adhesive Enhancer Wipe The Position To Be Glued (Body) With A Cotton Swab Or Paper Towel (Small Amount) In The Position To Be Glued (4) Installation Tear Off The 3M Protective Film On The Back Of The Product First, The Film Stays Outside, So That The Position Of The Product Can Be Adjusted Precisely, And Then The Film Slowly Tear Off And Press. (5) Safety Period Within 48 Hours After The Product Is Installed (Where The Glue Is Attached), It Cannot Touch Water, Oil, And Dust. Note: Please Compare Before Installation, The Red Film On The Back Of The Glue Will Be Torn Off And Will Not Be Returned