G-MARK | Stereo In-Ear Monitor System G-MARK J100 Wireless Stage Return For Guitar Studio Band Performance Show

【Switchable Stereo and Mono Modes】 The stage wireless monitoring system adopts advanced digital signal processing technology, adding stereo and mono switching functions. At the same time, the frequency group and frequency can be adjusted, which is convenient for users to switch modes in different occasions.【Enhanced RF Performance up to 320ft】The bodypack receiver adopts advanced digital signal processing technology to increase the signal and eliminate reception blind angle. Enables users to move freely in open spaces with a working distance of 160ft - 320ft. The main unit is made of solid metal material. It is the best choice for wireless in-ear monitoring.【Expandable Wireless Stage Return 】Unlimited number, unlimited addition of pockets, can be used for team stage monitoring tasks, high-quality earplugs provide pure sound quality and enhanced performance. It's perfect for a variety of wireless in ear monitor comeback events, guitar monitoring, performances, studio recordings, exhibitions, presentations, coaching, and more. The included corner brackets can be mounted on standard rack units.【90 Channels】With a total of 90 channels, this in ear monitor has the widest tuning range, ultra-linear RF transmission and a stronger signal than any other in-ear monitoring system. 20Hz-25KHz wide frequency response, 107 dB dynamic range.【UHF Band】520-590Mhz wireless in-ear monitor system, build your personal or team monitor system. Uncompressed wireless signal transmission, low noise and delay. Provides a smooth frequency response for any headphone.System SetupTransmitter Programming1.Hold for 3 seconds to turn on the system, hold on turn OFF.(as picture ①)2. Press SET key, SYNC, infrared frequency matching, press upkey, select frequency group, press down key, selectfrequencychannelNote: Whenusing more than one system, for best results,combine all System set to the same group number and selectone for each system in that group Differentchannelnumbers.3. L/R stereo level displayBodypack Receiver Setting1.Power ON/OFFTum on the power, the LCD screen will shows the normal Interface(as picture①)Battery signalreceiver has a total of three levels of power signalindication.    TransmitterTransmit Channel: Single ChannelRF Carrier Range: 520-590MHzOscillation Mode: PLL Phase-Locked Frequency SynthesisTransmit Power: ≥50mW, depending on regionAudio Response Range: 20Hz-20kHzAudio Input Connection: XLR and 6.3mm Combination JacksHeadphone Output: 6.3mm Stereo Jack, Adjustable VolumeHeadphone Output Impedance: ≥16ΩModulation Method: DQPSKBandwidth: 300kHz            Waistband ReceiverRated Number of Receiving Devices: UnlimitedRF Carrier Range: 520-590MHzOscillation Mode: PLL Phase-Locked Frequency SynthesisReceiver Sensitivity: S/N > 60dB with 3uV input; Stereo Separation: ≥ 45dB at 1kHzAudio Response Range: 20Hz-20kHzHeadphone Output: 3.5mm Stereo Headphone JackOutput Power: 2 x 50mW measured at 1kHz (THD 3%)Headphone Output Load Impedance: ≥ 16ΩAudio Response Time: Audio Code: PTLiveAudio Sampling: 24bit/48kHz    Packing List:Receiver1Bodypack Transmitter1Rack corner code x2Headphone1Antenna1Power plug1Manual1