Dental LED Curing Light 3 Working Modes Cordless Light Cure Machine for Dental Resin Restoration

Product PerformanceThis unit leverages high-power blue LEDs with an output wavelength of 450-460nm as its active light source. It is capable of curing all commercially available dental light-cure composite resins. The device features intelligent microprocessor control, allowing the user to adjust the curing duration as needed. The selected time is clearly displayed on the screen for easy operation.Product ApplicationsTeeth WhiteningGum ProtectionPost-Implant RestorationTechnical ParametersSafety Classification: Class II, Internally Powered, Type B equipment. Non-continuous operation.Product Name: Light Curing UnitModel: LA400Battery: Rechargeable Lithium-ion BatteryBattery Capacity: 2200 mAhBattery Voltage: 3.7 V DCBlue Light Wavelength: 450-460 nmBlue Light Intensity:High-Intensity Mode: 1500 - 2000 mW/cm²Pulse/Ramp Mode: 800 - 1500 mW/cm²Instruction ManualPress the P button to turn on the device. The indicator light below the current mode will stay on, and the screen will display the operating time for that mode.Press the M button to switch between different modes.To adjust the time, press and hold the M button for 3 seconds until you hear a beep, then release. The indicator light will blink, indicating that you have entered the time-setting mode. Press M to select a mode, and press P to set the desired operating time. The settings will be confirmed automatically if no further operation is made.Unplug the device after charging to extend battery life.If the surface becomes soiled, it can be wiped with alcohol.Warnings, Cautions & Notes Allow a cooling interval of more than 40 seconds between consecutive uses.Do not operate the device while it is connected to the charger.Never point the light source directly into the eyes. Always install the light shield before commencing the curing procedure to avoid exposure to harmful blue light.The product surface can be disinfected by wiping with alcohol.While the device has low magnetic emissions, it is recommended to keep it away from strong magnetic fields to prevent potential interference.At the end of its service life, this device and its accessories must be disposed of in accordance with local regulations.The lamp head rotates 360 degrees, allowing the clinician to adjust it for optimal access during procedures.This product is not impact-resistant. Handle with care during use and avoid dropping it to prevent damage.This product is intended for use only by qualified healthcare professionals.Transport and Storage ConditionsEnvironment:Temperature Range: -40°C to +55°CRelative Humidity: Transportation: Transportation requirements shall be in accordance with the contract agreement. The product must be protected from rain, snow, and mechanical impact.Storage: The packaged LED curing unit must be stored indoors in a well-ventilated area, free of corrosive gases. Temperature and humidity conditions must comply with the manufacturer's specifications.