RJ45 CAT6 15M Ethernet Network Flat LAN Cable UTP Patch Router

Mainly used for Gigabit Ethernet (1000Mbps)Waterproof, anti-pull and anti-interferenceVery soft, light and easy to carryEspecially for notebook computer usersThe outer material is high-grade PVC material, which is flame retardantSignal return ratio (SNR), smaller delay error and better performanceSmall attenuation, low crosstalk, higher ratio of crosstalk to crosstalk (ACR)Features:Small attenuation, low crosstalk, higher ratio of crosstalk to crosstalk (ACR) and signal return ratio (SNR), smaller delay error and better performance.Mainly used for Gigabit Ethernet (1000Mbps).This type of cable increases the winding density, the outer layer is made of high-quality insulating material, the transmission rate of 250MHz, for voice transmission and the maximum transmission rate of 10Mbps data transmission.Waterproof, anti-pull and anti-interference, it can be used in the field. The outer material is high-grade PVC material, which is flame retardant. The cable is very soft, light and easy to carry. Especially for notebook computer users.RJ45 (8P8C) to RJ45 (8P8C), fully in line with Cat.6 standard, support 10/100 / 1000M network environment. Transmission efficiency is 2.5 times the traditional cable. Using pure copper core material, multi-core super-soft wire.Specification:

Cable Length: (Approx.)1m, 2, 3m, 5m,8m , 10m,15m,20m,30m

Impedance: 100 ohms ± 15%, IMHzto 600MHz

Transmission Delay: 536ns / 100mm

Delay Offset: 45 ns max

Conductor Resistance: 66.58 ohms max / km

Capacitance: 5.6NF max / 100m

DC Resistance: ≤ 7.55Ω

Pressure Resistance: 300 vots AC DC

Bending Radius: 1 inch (4 times the cable diameter)

Rated Speed: 70 nom%

U / NEC Rating: CMR, CM

Working Temperature: -20 ℃ to 60 ℃

Storage Temperature: -20 ℃ to 80 ℃

Conductor: UTP 28AWG 7/0.12CCA