4 Buttons Steel Line ZT-07 SD800 Garage Door Remote Control 433.92Mhz Rolling Code Metal & ABS Replacement Gate Transmitter

Shopping Notice:We know you have a world full of choices, thank you for choosing us!Before orderKindly note, our remote is the COMPATIBLE / REPLACEMENT /COPY /CLONE remote, not the original one.Please make sure your original remote control can be used before buying.As a general guide, if the remote you currently use is one of the remotes pictured in the ad then this remote will be copy with your remote.If you are not so sure, please contact us without hesitate.Description:Frequency: 433.92 MHzCode: rolling codeBattery: 27A 12V, battery includedButtons: 4Control distance: 30m-150m (open space)LED IndicatorSlim DesignControls up to 4 doorsProgramming method: programming with the receiver.Programming Instructions:To program:Press and hold the "P" and "+" buttons on the motor until all the lights on the motor turn on and LED 7 begins to flash.Press the "+" button on the motor once. All LED lights should turn off except LED 7, signifying that the opener is now in Learn mode.Quickly press and release (for at least one second) the desired button on your new remote twice. All LED lights will turn on and LED will begin to continually flash.Press the "P" button on the motor once to save the remote control to the opener. LED 3 will switch on, indicating that the remote control has been successfully programmed to the opener.Repeat the above procedure additional handsets.To delete:Press and hold the "P" and "+" buttons on the motor until all the lights on the motor turn on and LED 7 begins to flash.Press and hold the "-" button until the LED 7 turns off, then begins to flash again.Press the "P" button once. LED 3 will switch on, indicating that all codes have been deleted from the opener.Compatibility:Steel line ZT-07RD800SD800SD1200SPRINT800Include:1 x Remote Control1 x Battery1 x Keychain1 x English Manual