For ATA PTX4 Herculift PTX-4 PTX4 Garage Door Replacement Remote Control 433.92 MHz

This is a compatible remote control for ATA PTX-4 433.92MHz Garage Door Remote ControlCompatibility list：ATA PTX 4Fitment:CRX-1 (Receiver)CRX-2 (Receiver)GDO-2v5 (SecuraLift)GDO-2v6 (SecuraLift)GDO-2v7 (SecuraLift)GDO-4v3 (EasyRoller)GDO-4v4 (EasyRoller)GDO-4v5 (EasyRoller)GDO-4v6 (EasyRoller)GDO-6v1 (Slim-Drive EasyRoller)GDO-6v2 (Slim-Drive EasyRoller)GDO-7v1 (SecuraLift)GDO-8v1 (EasyRoller II)GDO-8v2 (EasyRoller II)GDO-9v1 (SecuraLift)NOTE: Not compatible with PTX5 remotesDescription:1.Type of programming: Programming with the receiver2.Number of channels: 43. Code: rolling code4. Frequency: 433.92MHz5.Woring Range: 10-50 m (open space) 6.Power supply: 12V 27A7.Remote come with Battery !!! Security of use: dynamic code provides a high level of security, non-copyable code.Disclaimer:Your Old remote must be same as the advertisement , new remote do not compatible with other remotes .Programming1. Open the casing of your receiver. It is located next to your motor.2. On the receiver circuit board, press the programming button (PGM). The LED light of the receiver illuminates. Let the button go.3. In the next 10 seconds, press a button on your new remote control. Let it go.Wait 10 seconds.Your new remote control is programmed.