For Australia Steel-Line ZT-07 Garage Gate Door Remote Command 433MHz Rolling Code Motor RD800 SD800 SD1200 SPRINT800 Controller

Steel-Line ZT-07 Garage Door Remote Replacement SD800 Transmitter 433,92 MHzFeatures:LED Indicator Battery: 27A 12V Slim Design Controls up to 4 doors 433.92 MHz FrequencyPackage Include:1 x Remote Control for Steel-Line ZT-07 1 x Battery 1x Key ringCompatibility:RD800 SD800 SD1200 SPRINT800Steel Line Programming Instructions:Press and hold the "P" and "+" buttons on the motor until all the lights on the motor turn on and LED 7 begins to flash. Press the "+" button on the motor once. All LED lights should turn off except LED 7, signifying that the opener is now in Learn mode. Quickly press and release (for at least one second) the desired button on your new remote twice. All LED lights will turn on and LED will begin to continually flash. Press the "P" button on the motor once to save the remote control to the opener. LED 3 will switch on, indicating that the remote control has been successfully programmed to the opener. Repeat the above procedure additional handsets. To delete: Press and hold the "P" and "+" buttons on the motor until all the lights on the motor turn on and LED 7 begins to flash. Press and hold the "-" button until the LED 7 turns off, then begins to flash again. Press the "P" button once. LED 3 will switch on, indicating that all codes have been deleted from the opener.