AJIUYU | Multi-Touch Trackpad Pogo Pin Direct Connection Magic Keyboard Case for iPad Pro 12.9 3rd-6th Gen & iPad Air 13 Inch M4/M3/M2

For iPad Air 13 / Pro 12.9 Magic KeyboardMagnetic separation, backlight, Multi-touch TrackPad、Smart Pogo Pin connection、Reverse ChargeInstallation method: First, you need to confirm whether your machine model is correct, then open the iPad tablet (note that the iPad not be turned off, otherwise the keyboard cannot be connected), align it with the Pogo Pin contact, connect it magnetically, and see the green indicator light, indicating that it can be used directly. If the connection is unstable, it is recommended that the buyer remove it and reinstall it. It is best to pinch the contact position during installation！！！This Magic Keyboard connects and powers itself through the three smart connectors on the back of the iPad, requiring no Bluetooth pairing and no charging for operation.Product Description:1.No data cable connection or Bluetooth pairing anymore to enjoy connect-and-go convenience! With a PIN connector design, you can instantly connect the tablet to the keyboard by installing the tablet on the keyboard instead of extra Bluetooth pairing, which ensures a more stable and convenient transmission, providing a more stable and responsive typing experience.2.You don't need to charge the keyboard without a built-in battery. When the tablet and keyboard are connected, the keyboard immediately gets power from the tablet and turns on, reducing the charging frequency for both of them. When the tablet runs out of battery, you can connect the keyboard to a power source, and then the tablet will be charged by the pass-through current.Product parameters:Connection method: Magnetic Pogopin contact connectionCharging interface: Type-c (rechargeable, upgradable)Number of buttons: 64/84Normal/PD fast charging: 5V/2A; 9V/2A (supports overvoltage protection)Green indicator light: working statusWhite indicator light: Capslock capital lockPower on current: ≤ 85mA (including backlight)Standby current: ≤ 6mASleep current: ≤ 0.3mAShutdown current: 0Single finger tapping current: ≤ 10mATouchpad current: 15mABacklight current: 50mA low; 60mA medium; 70mA highBacklight: Colorful backlight with three levels of adjustmentMaximum supported voltage: 9VMiaokong gesture function: supportsQuick multimedia function: SupportsQuick language switching function for input method: SupportsSupported system versions: iPadOS 17.0 and above1. Connection method: Pogo Pin direct connection (no Bluetooth required)2. The four corners of the touchpad need to be pressed to use3.The center position of the touchpad cannot be touched or pressed, only the 4 corners support itHow To Verify Your Tablet Model1.Turn iPad tablet to the back find your specific model,Par exemple: A ****2.Find the "Settings"--Click the "About"--Find the "Model"3.Please select the correct model number for your tablet purchase after viewing it.This style of keyboard cover is compatible with these 7 models. Please confirm your machine model before purchasing to avoid purchasing errors!Compatible models and codes:For iPad Air 13 inch M4 2026 （A3461 、A3462 、 A3464）For iPad Air 13 inch M3 2025 （A3268、 A3269 、A3271）For iPad Air 13 inch M2 2024 （A2898、A2899、A2900）For Apple iPad Pro 12.9 2018 3rd Generation (A1876、 A2014、 A1895、 A1983)For Apple iPad Pro 12.9 2020 4th Generation (A2069 、A2232、 A2229 、A2233)For Apple iPad Pro 12.9 2021 5th Generation (A2378 、A2379、 A2461、 A2462)For Apple iPad Pro 12.9 2022 6th Generation ( A2436 、A2764 、A2437 、A2766)Note: Tablet and stylus are not included in the packaging！！[ Note:Only the corresponding machine model can be magnetically attracted. If your machine is not of the following model, please do not purchase it!!! ]Note: The camera hole of the keyboard cover is a square hole. If you mind, please do not purchase it  ~This keyboard cover is compatible with the 7 models mentioned above. If your machine is not the model mentioned above, it will not be compatible. Please check your machine model before purchasingAttention PleaseEnglish versionkeyboard : There are English letters on the keyboard only.Multi-language versionkeyboard : English letters and carved language letters together ..【[For example, if you choose Russian, the keyboard will display English and Russian letters. Please note that the same letters will not be engraved repeatedly]】（Due to the difference in the number of keyboard keys compared to a normal office keyboard, some special character engraving positions are the same, which is a normal phenomenon）The keyboard Core defaults to English, and the characters engraved on the keyboard are only a Surface display.so in some countries, even if the input method is switched, the special symbols do not necessarily match the keyboard function layout（You can hold down the Shift combination）.If you mind, please do not purchase！！.Note: Duet to the material of the white keyboard, the engraved letters are dark gray！！！Hebrew, Russian, Arabic, Korean: Steps to switch input methods:【1】After connecting the keyboard, open iPad Settings - General - Keyboard - Keyboard - Add New Keyboard (add the language you need)【2】After adding the language, switch input methods: simply click the (Globe Key) button (select the language you need)【3】For detailed instructions, please read the user manual. If you have any questions, you can contact "Online Services" for consultation .The steps for switching languages in the following special countries: