POWERTECH PR2 PR4 PR1 Garage Door Remote 433MHz Rolling Code Command Handheld Transmitter Automatic Door Sliding Gate Controller

POWERTECH PR2 PR4 PR1 Garage Door Remote 433MHz Rolling Code Command Handheld Transmitter Automatic Door Sliding Gate ControllerSpecifications1，Type: Programming the Receiver2，Material：ABS3，Buttons：4Buttons4，Frequency：433MHz5，Code：Rolling Code6，Battery：(Include Battery)7，Distance：10m-100m (Open)Compatible WithPowertech PR1Powertech PR2Powertech PR4Access to receiver required. Please make sure you got access to your receiver/opener before purchase.Disclaimer: Your remote control must be the same as the picture and your model must be in the list, we will not be responsible for wrong purchaseFeaturesWhen your remote control is lost or damaged, you can purchase our remote control and pair it with your receiver. After the remote control is successfully programmed, you will get a new remote control.How to Programming ？Materials required for programming: your receiver!Open your receiver from the garage door.Press the programming button. Inscription is usually: ENR, MEMO or PROG.On some receivers, it is necessary to hold down the programming button.On the receiver the LED indicates the start of the programming mode.Press for one second on a button on the new remote control and let it go again.The LED of the receiver will light differently or goes out to indicate a successful programming.Wait a few seconds to exit the programming mode.Congratulations! Your new remote control is programmed!IncludeRemote ControlInclude BatteryKeychain