Aluminium Flat Bar 20 Feet Roll 1/2 3/4 1 Inch Silver 1/16 Inch Tebal Bar Rata DIY Home Improvement Straight Snip Cutter

🛠️ Aluminium Flat Bar – Silver ColourPlan your DIY and home-improvement projects with aluminium flat strip supplied as a 20-foot roll. Choose the width you need, or select the separate STRAIGHT SNIP CUTTER option.📏 Roll Sizes• 1/2" width × 1/16" thickness: approximately 12.70 × 1.59mm.• 3/4" width × 1/16" thickness: approximately 19.05 × 1.59mm.• 1" width × 1/16" thickness: approximately 25.40 × 1.59mm.• Each aluminium option contains 1 roll, 20 feet long.• Silver-colour flat rectangular profile, as shown in the photos.• Coiled supply format; straight segments in the images illustrate the profile.• Width and thickness are separate measurements.• Choose the correct width before checkout.✂️ Separate Cutter OptionSTRAIGHT SNIP CUTTER has pointed cutting jaws, a compound linkage and yellow-and-black handles, as shown. It is a separate selectable product, not included with an aluminium roll. Its maximum cutting thickness has not been supplied; do not assume it can cut the 1.59mm aluminium strip.🔧 Prepare the Flat BarMeasure the required length and mark the cut. Secure the section in a vise with soft jaw protection. Cut with a suitable metal-cutting hacksaw using steady strokes, then file sharp burrs with a handled metal file. Wear eye protection and keep hands clear of the cutting path.For DIY trim, small frame-making and workshop fabrication planning. Check suitability for your own design; no structural load rating, alloy grade or anodised finish is specified. Demonstration tools, fasteners and completed projects are not included.🛒 Select Your VariationChoose 1/2", 3/4" or 1" for a 20-foot aluminium roll, or choose STRAIGHT SNIP CUTTER for the cutter option.